| Security
viewer |
no
charge |
| Flat
threshold |
no
charge |
| Outside
operators |
$1,100
.00 |
| Assault
resistant security latches |
$1,100.00 |
| Outside
deadbolt lock assembly |
$225.00 |
| Custom
sized blast door |
quoted
for each door |
| Oregon
licensed Professional Engineer stamped certificate |
quoted
for each door |
|
For
more information on these options, please see the installation
and operation manual
(PDF):
Click
on the image above to view this manual (PDF)
Here
are the certified engineering drawings for the double leaf
blast door:
Click
on the image above to view this document (PDF)
|
|
This
double leaf blast resistant door is designed to allow vehicles
to pass through. It carries the same pressure rating as
our single
leaf blast door.
This
door comes in two standard sizes - and customs sizes can
be built. The standard sizes are 72 inches wide by 80 inches
tall and 96 inches wide by 80 inches tall. The free opening
when installed is nominally one half inch under the rated
size. Please see the manual
(PDF)
for more information.
As
with the single leaf blast door, this door is designed to
bolt to the wall with high strength concrete wedge anchors
- after the wall is poured and has cured. This drastically
eases installation time and cost. If you choose the assault
resistant cam latches, you also get the wall capture brackets
- which give you the security of a poured in place door
with the ease of installation of a bolt on door.
The
double leaf blast door can be built in two halves - with
each door leaf attached to half the frame. This reduces
the cost of shipping and eases the handling of the door
when you install it.
If
your shelter has the ability to house a vehicle, you need
this door. Please measure the height and width of your vehicle
before ordering.
Double
leaf door - one side open
For
more information, please see the installation
and operation manual (PDF).
|
